27 BEST Hot Tub Leveling Ideas (Proven)

William T Johnson Jan 20, 2023
0 People Read
woman in a hot tube

Disclosure: Some of the links in this article may be affiliate links, which can provide compensation to me at no cost to you if you decide to purchase. This site is not intended to provide financial advice and is for entertainment only. 

Are you looking for hot tub leveling ideas?


Installing a hot tub is an exciting experience, but it can also be quite challenging.


It requires precision and accuracy to get the hot tub properly leveled so that it will function properly.


Fortunately, there are several hot tub leveling ideas that can help make this process easier and more efficient.


Here I have compiled 27 of the best hot tub leveling ideas currently available on the market today.


Whether you are a novice or experienced installer, these tips will help ensure your hot tub is level and stable before use.


So let's dive right in!


1. Use hot tub shims:

Hot tub shims can be used to even out the hot tub base, ensuring that it is level.

To use hot tub shims, simply place them under the hot tub and adjust as needed until the hot tube is completely level.

2. Install a hot tub on an entirely flat surface:


Before installing a hot tub, make sure that you have a flat surface in which to install it on.

This will prevent any unevenness when filling with water and ensure your hot tube remains level throughout its lifetime of usage.


3. Place wooden or plastic spacers under the corners of your hot tube:

Wooden or plastic spacers work just like the wedges used for leveling furniture and can help even out any bumps or dips in your backyard's terrain so that it’s perfectly leveled before installation begins.


4. Utilize self-leveling cement:

Self-leveling cement works wonders for outdoor surfaces such as patios and decks where there may be slight variations in height over time due to weather conditions.

Using self-leveling concrete ensures that any new construction is done correctly from day one without having to worry about later adjustments being necessary once filled with water.


5. Make sure hot tub is level from side to side: I


In addition to making sure hot tubs are level from front to back, it’s important that hot tubs also be level from side to side.

This will help ensure hot tubs don't become off-balance as users enter and exit them.


6. Utilize a hot tub installation kit:


Hot tub installation kits come with everything you need for proper leveling of your hot tube, including levels, wedges, and spacers.

They make the whole process easier and more efficient so that you can get back in the hot water faster!


7. Use a 4x4 wood post or concrete block:

If you're installing your hot tube on an uneven surface, a 4x4 wood post or concrete block can be used to help level it out.

Simply place the post or block under the hot tube and adjust as necessary until hot tube is perfectly level.



8. Adjust hot tub feet:


If your hot tube has adjustable feet, use them to make small adjustments in order to level hot tubes from side-to-side and front-to-back.


9. Utilize hot tub jacks:


Hot tub jacks are great for leveling hot tubes that aren’t quite on the same plane.

Simply put them under each corner of hot tubes and adjust as needed until hot tube is leveled correctly.


10. Use a carpenter's level:


Using a carpenter's level can help hot tube installers get hot tubes as close to perfectly level as possible.

Simply place the level on hot tubes and adjust until all readings are equal.


11. Use hot tub blocks:


Hot tub blocks can be used to fill in any gaps under hot tube, ensuring that hot tube remains even when filled with water.

Simply place hot tub blocks under hot tube and adjust until it’s perfectly leveled.


12. Utilize a string line:


A string line is useful for making sure hot tubes are level from side-to-side.

Just tie one end of the string onto each corner of the hot tube and then adjust as needed until all four corners are at the same height.


13. Use hot tub leveling feet:


Hot tub leveling feet are great for hot tubes that have slightly uneven surfaces.

Simply place hot tub leveling feet under hot tube and adjust as necessary until hot tube is level.


14. Check the bubble level:


A bubble level can be used to quickly check the hot tube's overall balance.

Just place it on the hot tube and adjust its position until the bubble is centred in its housing.

This will help you ensure the hot tubes is perfectly leveled out before


15. Fill in any dips and bumps:


If you find that your hot tube isn’t perfectly level due to dips or bumps in the ground, try filling them with topsoil or concrete before attempting to level hot tubes.

This will help ensure hot tubes are leveled properly from the start without any unnecessary adjustments being made later on.


16. Utilize a hot tub base pad:


Hot tub base pads can be used for leveling hot tubes.

Simply line up the corners of hot tube with the pre-cut holes in the pad and adjust as necessary until it’s perfectly leveled out from front to back and side-to-side.


17. Place sand bags beneath hot tube:


Sandbags can be placed underneath each corner of a hot tube prior to installation; this helps level out any uneven spots while also providing extra support once filled with water.


18. Utilize hot tub wedges:

Hot tub wedges are great for leveling hot tubes that are slightly off-balance; simply place the wedges under each corner of hot tube and adjust until hot tube is perfectly level.


19. Measure the area before installation:


Measuring the area around hot tubes prior to installation can help identify any potential problems that may arise when trying to level hot tubes, allowing installers to correct them in advance rather than having to make adjustments after the fact.


20. Use a trowel or rake:


A trowel or rake is helpful for ensuring hot tubes are leveled out from front-to-back as well as side-to-side.

Simply use it to fill in any dips or bumps prior to installing your hot tube so that it’s level from all angles once filled with water.


21. Use hot tub leveling shims:


Hot tub leveling shims are great for hot tube installers who need to make small adjustments in order to level hot tubes from front-to-back and side-to-side.

Simply place the shims under each corner of hot tube and adjust as necessary until hot tube is perfectly even.


22. Check the manufacturer's instructions:


Before attempting any hot tub leveling, it’s important to check the manufacturer’s instructions first.

This will help ensure that you don’t inadvertently damage your hot tubes while trying to level them out.


23. Submerge a weight on one end:


If your hot tube isn't quite balanced after all other attempts have been made, try submerging a heavy weight or rock on one end of the hot tube in order to get it as close as possible to level before filling with water.


24. Utilize a power auger:


For larger installations, consider using a power auger in order to create holes for each corner of your hot tube prior installation.

This will help ensure that all four corners sit evenly when filled with water later on down the line.


25. Use hot tub leveling blocks:


Hot tub leveling blocks can be used to support hot tubes.

These are great for ensuring that hot tubes sit level on sloped or uneven surfaces, and they also help keep hot tubes from sinking into the ground when filled with water.


26. Check manufacturer's recommended levels:


Before attempting to install a hot tube on your own, it’s important to check the manufacturer’s recommended weight limits and installation heights.

This will ensure hot tubes are placed in an area that won't be damaged by excessive weight or exposed too much heat/cold before being filled with water.


27. Utilize hot tub jacks:


If you need more leverage while leveling out hot tubes, consider using hot tub jacks; simply place them under each corner of the hot tube and adjust until all four corners are leveled out evenly

from front-to-back and side-to-side.


And a bonus one: Leveling out sections at a time:


When installing large sized hot tubes, try leveling out one section at a time rather than trying to do everything simultaneously.


This is usually faster and easier than attempting to level entire installations all at once - plus it helps minimize any potential mistakes!


These hot tub leveling ideas should help you get your hot tubs perfectly level and ready for use.


Remember to always follow the manufacturer’s instructions when installing hot tubes, as this will ensure that any adjustments made are safe and effective.


With these tips in mind, you can rest assured that your hot tube is leveled correctly before filling it with water - giving you a great way to relax after a long day!






Disclosure:  Some of the links in this article may be affiliate links, which can provide compensation to me at no cost to you if you decide to purchase. This site is not intended to provide financial advice and is for entertainment only.